Education
Ph. D. -
Purdue University, 2004
M. Sc. - University of Saskatchewan (Canada), 1997
B. Sc. - Tsinghua University (China), 1992
Employment
08/2018 – present: Professor,
Department of Mechanical Engineering, University of Texas at Dallas
06/2011 – 07/2018: Associate
Professor (with tenure), Department of
Mechanical Engineering, University of Texas at Dallas
08/2010 – 05/2011: Associate
Professor (with tenure), Department of
Mechanical Engineering, University of Wisconsin – Milwaukee
07/2004
– 08/2010: Assistant Professor, Department of Mechanical
Engineering, University of Wisconsin – Milwaukee
08/1996
– 05/2004: Graduate Research and Teaching Assistant, Purdue
University
08/1994 – 07/1996: Graduate Research Assistant, Univ. of
Saskatchewan, Canada
08/1992 – 07/1994: Assistant Research Engineer, Inner
Mongolia Microcomputer Research Institute (Star Computers), Inc., Hohhot,
China.
Consulting/Guest
12/2006
– 2015: Consultant for Building Efficiency Research Group, Johnson
Controls, Inc.
04/2013 - present: Consultant
for Lennox
Industires, Inc.
01/2009
– 12/2009: Consultant for Eaton Corporation
Innovation Center.
Professional Services
2016 – present: Associate Editor, Mechatronics (IFAC)
2012 – 2015: Associate Editor, IEEE/ASME Transactions on Mechatronics
2012-2015: Conference Proceeding
Associate Editor, ASME Dynamic Systems and Control Division (DSCD)
2014: Organizer, ASME DSCC 2014, Session on Frontiers in Building
HVAC Controls
Panelist for NSF and DOE
Research Interests
· Building HVAC and Thermal Systems
·
Model-free Control for
Efficient Operation: Chilled-Water Plant;
Variable Refrigerant Flow (VRF); Air-Side Economizer; Air-source Heat Pump;
CO2 Heat Pump; Ground-source Heat Pump, Vapor-injection Heat
Pumps.
·
Modelica Based Dynamic
Simulation Modeling: Variable Refrigerant
Flow (VRF), Air Handling Unit (AHU), Centrifugal Chiller, Screw Chiller,
Mechanical Draft Cooling Tower, Thermoelectric System.
·
Self-optimizing
Control (SOC) with Data-driven Methods: Optimal Selection of
Control Structure.
· Controls for Wind Energy
·
Model-free Controls for
Maximizing Energy Capture for Turbine and Farm Level Operations
·
Smart Actuators for
Stabilizing Offshore Floating Wind Turbine
·
Individual Pitching
Control (IPC) Including Wake Interaction
·
Bumpless Transfer of Inter-Region Control Switching for Improving Power
Quality and Load Reduction
· Building-to-Grid Operation
·
Demand Response and
Ancillary Services
·
Centralized and
Multi-agent Optimal Charging Management for Parking-lot Electric Vehicles
·
Vehicle-to-Grid Energy
Management; Risk Management against Spike Price
· Power Management of Plug-in Hybrid and Electric Vehicles; Battery Modeling, Equilization and Diagnostics
·
Trip Based Power
Management for Electrified Vehicles
·
Battery Pack Worthiness of
Replacement
· Fault Diagnosis of Wind Turbine Hydraulic
Pitching Systems
·
Self-Optimizing MPPT Control and Integrated
Diagnostics for Photovoltaic (PV) Systems
·
Sequential ESC Based
Global MPPT for PV Systems under Variable Shading
·
Adaptive Extremum Seeking
Control for PV MPPT
·
MPPT and Integrated
Diagnostics for Multi-string PV Systems with Multi-input ESC
Journal
Papers
1. Zhou, F., Li, Y.
and Dong, L. “A Model-frugal Two-level Control Strategy for Energy
Efficient Frequency Regulation with Variable Refrigerant Flow Air
Conditioning System,” accepted by Energy and Building, November
2023.
2. Wu, Z. and Li, Y.
“Optimal control of wind farm power output with delay compensated
nested-loop extreme seeking control,” AIP Journal of Renewable and
Sustainable Energy, Vol. 15, No. 4, June 2023, DOI: 10.1063/5.0134878.
3. Pan, C. and Li, Y.
“Koopman Model Predictive Control of An Integrated Thermal Management
System for Electric Vehicles,” ASME Journal of Dynamic Systems,
Measurement and Control, 145(5): 051005 (22 pages),
Paper No:
DS-22-1272, May 2023, https://doi.org/10.1115/1.4062160.
4. Li, W., Kishore, M.N.,
Zhang, R., Bian, N., Lu, B., Li, Y., Qian, D. and Zhang, X.
“Comprehensive studies of SS316L/IN718 functionally gradient material
fabricated with directed energy deposition: multi-physics &
multi-materials modelling and experimental validation,” Additive
Manufacturing, Vol, 61, 5 Jan.
2023, 103358.
5. Zhao, Z., Li, Y.,
Salsbury, T.I. and House, J.M. “Data-Driven Self-optimizing Control with
Parametric Programming based Constraint Handling,” ASME Journal of
Dynamic Systems, Measurement and Control, Sep 2022, 144(9):
091004 (20 pages).
6. R. Zhang, N. Bian, H. Lu, Y. Li, Y.
Tian, W. Li. “Molten pool swing in printing the steel/inconel
functionally gradient material with laser-based Directed Energy
Deposition,” Manufacturing Letters, Vol. 32, April 2022, pp. 44-48.
7. Zhou, F., Li, Y.,
Wang, W. and Pan, C. “Integrated Energy Management of A
Smart Community with Electric Vehicle Charging using Scenario based
Stochastic Model Predictive Control,” Energy and Buildings, Vol. 260, April 2022, 111916, https://doi.org/10.1016/j.enbuild.2022.111916.
8. Wu, Z. and Li, Y. “Hybrid Model Predictive
Control of Floating Offshore Wind Turbines with Artificial Muscle Actuated
Mooring Lines,” accepted by ASME Journal of Dynamic Systems, Measurement
and Control, May 2022, 144(5): 051003 (12 pages).
https://doi.org/10.1115/1.4053429.
9. Dong, L., Li, Y., House, J.M. and Salsbury,
T.I. “Dither Extremum Seeking Control of A
Variable Refrigerant Flow System with Equality Constraint Handling,” Science
and Technology for the Built Environment, Vol. 28, No. 2, pp. 152-169,
2022, DOI: 10.1080/23744731.2021.1993671.
10. Zhao, Z., Li, Y.,
Salsbury, T.I. and House, J.M. “Extremum-seeking control integrated online
input selection with application to a chilled-water plant,” in press, Science and Technology for the Built
Environment, Vol. 28, No. 2, 2022, pp. 170-187, DOI:
10.1080/23744731.2021.1987140.
11. Zhao, Z., Li, Y.,
Salsbury, T.I. and House, J.M. “Global Self-optimizing Control with
Data-driven Optimal Selection of Controlled Variables with Application to
Chiller Plant,” ASME Journal of Dynamic Systems, Measurement and Control,
Feb. 2022, 144(2): 021008 (13 pages), DOI:10.1115/1.4052395.
12. Kumar, D., Li, Y. and Wu, Z. “Power-setpoint
Extremum Seeking Control for Maximizing Wind Power Capture of Turbine and
Farm Operation,” Wind Engineering,
Vol. 45, No. 5, pp. 1340-1360. October 2021. DOI:10.1177/0309524X20979914
13. Ashuri, T., Li, Y. and S. E. Hosseini, “Recovery of energy
losses using an online data-driven optimization technique,” Energy Conversion and Management,
Vol. 225, Dec. 2020, 113339, DOI:10.1016/j.enconman.2020.113339.
14. Zhao, Z., Salsbury,
T.I., House, J.M., Alcala, C.F. and Li,
Y. “A Comparison of Two Extremum Seeking Control Strategies based on
Simulation and Laboratory Tests for Heat Pump Air Conditioning,” Science and Technology for the Built
Environment, 27(3), pp. 1-15, August 2020, DOI:
10.1080/23744731.2020.1806625.
15. Dong, L., Li, Y., House, J.M. and Salsbury,
T.I. “Model-free Control and Staging for Real-time Energy Efficient
Operation of a Variable Refrigerant Flow System with Multiple Outdoor
Units,” Applied Thermal Engineering, Vol. 180
(2020) 115787,
November 2020. https://doi.org/10.1016/j.applthermaleng.2020.115787.
16. Wang, W., Zhou, Q.
Tian, G. Hu, B. Li, Y. and Cao,
F. “The intermediate temperature optimization for cascade refrigeration
system and air source heat pump via Extreme Seeking Control,” International Journal of Refrigeration,
Vol. 117, pp. 150-162, September 2020.
17. Wu, Z. and Li, Y. “Platform Stabilization of Floating
Offshore Wind Turbines by Artificial Muscle based Active Mooring Line Force
Control,” IEEE/ASME Transactions on
Mechatronics, Vol. 25, No. 6, pp. 2765-2776, December 2020.
18. Zhao, Z., Li, Y., Salsbury, T.I., House, J.M.
and Alcala, C.F. “Local Self-Optimizing Control based on Extremum Seeking
Control,” Control Engineering
Practice, Vol. 99, June 2020, 104394, DOI:
10.1016/j.conengprac.2020.104394.
19. Wang, W., Li, Y. and Hu, B. “Real-time
Efficiency Optimization of A Cascade Heat Pump System
via Multivariable Extremum Seeking,” Applied
Thermal Engineering, Vol. 176, July 2020, 115399, DOI:
10.1016/j.applthermaleng.2020.115399.
20. Wu, Z. and Li, Y. “Nacelle Anemometer
Measurement based Extremum-Seeking Wind Turbine Region-2 Control for
Improved Convergence in Fluctuating Wind,” Wind Energy, Vol. 23, No. 4, pp. 1118-1134, April 2020.
21. Wu, Z. and Li, Y. “Platform Stabilization and
Load Reduction of Floating Offshore Wind Turbines with Tension-leg Platform
using Dynamic Vibration Absorbers,” Wind
Energy, Vol.
23, No. 3, 711-730, March 2020.
22. Xiao, Y., Fahimi, B., Rotea, M.A. and Li,
Y. “Multiple Reference Frame Based Torque Ripple Reduction in DFIG-DC
System,” IEEE Transactions on Power
Electronics, Vol. 35, No. 5, 4971-4983, May 2020.
23. Wang, W. and Li Y. “Intermediate
Pressure Optimization for Two-Stage Air-Source Heat Pump with Flash Tank
Cycle Vapor Injection via Extremum Seeking,” Applied Energy, Vol. 238, pp. 612-626, March 2019.
24. Wang, W., Li, Y. and Cao, F. “Extremum
Seeking Control for Efficient Operation of An Air-Source Heat Pump Water
Heater with Internal Heat Exchanger Cycle Vapor Injection,” International Journal of Refrigeration,
Vol. 99, pp. 153-165, March 2019.
25. Yang, Z. and Li, Y. “Active Vertical Vane
Control for Stabilizing Platform Roll Motion of Floating Offshore
Turbines,” Wind Energy. Vol. 21,
No. 11, November 2018, pp. 997-1010.
26. Xiao, Y., Li, Y. and Rotea,
M.A. “CART3 Field Tests for Wind Turbine Region-2 Operation with Extremum
Seeking Controllers,” IEEE
Transactions on Control Systems Technology, Vol. 27, No. 4, July 2019,
pp. 1744-1752.
27. Dong, L., Li, Y., House, J.M. and Salsbury,
T.I. “Mode Switching Control of A Multi-functional
Variable Refrigerant Flow System,” Science
and Technology for the Built Environment., Vol. 24, No. 4, pp. 418-434,
December 2017.
28. Dong, L., Li, Y., Salsbury, T.I., House, J.M.
and Wu, Z. “Multivariable Extremum Seeking Control for a Multi-functional
Variable Refrigerant Flow System,” Science
and Technology for the Built Environment, Vol. 24, No. 4, pp. 382-395,
November 2017.
29. Hu, B., Li, Y., Wang, R.-Z., Cao, F., Xing,
Z. “Real -time
Minimization of Power Consumption for Air-Source Transcritical CO2 Heat
Pump Water Heater System,” International
Journal of Refrigeration, Vol. 85, pp. 395-408, January 2018.
30. Mu, B., Li, Y., House, J.M., Salsbury, T.I.
“Real-time Optimization and Sequencing of Chilled-water Plant with Parallel
Chillers Based on Extremum Seeking Control,” Applied Energy, Vol. 208, pp. 766-781, December 2017.
31. Salsbury, T.I., House,
J.M., Alcala, C. and Li, Y. “An
Extremum-Seeking Control Method Driven by Input-Output Correlation,” Journal of Process Control, Vol. 58,
pp. 106-116, October 2017.
32. Zhang, L. and Li, Y. “Regime-Switching Based
Vehicle-to-Building Operation against Electricity Price Spikes,” Energy Economics, Vol. 66, pp. 1-8,
August 2017.
33. Zhang, L. and Li, Y. “Optimal Management for
Parking-lot Electric Vehicle Charging by Two-Stage Approximate Dynamic
Programming,” IEEE Transactions on
Smart Grid, Vol. 8, No. 4, pp. 1722-1730, July 2017.
34. Van Dijk, M.T., van Wingerden, J.-W., Ashuri, T. and Li, Y. “Wind farm
multi-objective wake redirection for optimizing power production and load,” Energy,
Vol. 121, pp. 561-569, Feb. 2017.
35. Xiao, Y., Li, Y., Rotea,
M.A. “Multi-objective Extremum Seeking Control for Enhancement of Wind
Turbine Power Capture with Load Reduction,” Journal of Physics: Conference Series 753 (2016) 052025, The
Science of Making Torque from Wind (TORQUE 2016),
doi:10.1088/1742-6596/753/5/052025.
36. Mu, B., Li, Y., House, J.M. and Salsbury,
T.I. “Experimental Evaluation of Extremum Seeking Control for Efficient
Operation of Airside Economizers,” Control
Engineering Practice, 50, pp. 37-47, May 2016.
37. Mu, B., Li, Y. and Seem, J.E.
“Discrimination of Steady State and Transient State of Dither Extremum
Seeking Control via Sinusoidal Detection,” Mechanical Systems and Signal Processing, Vol. 76, pp. 93-100,
2016.
38. Zhang, L. and Li, Y. “A Game Theoretic Approach
to Optimal Scheduling of Parking-lot Electric Vehicle Charging,” IEEE Transactions on Vehicular
Technology, 65(6), pp. 4068
– 4078, October 2016.
39. Chen, Q., Li, Y., Seem, J.E. “Bumpless Transfer Based Inter-region
Controller Switching of Wind Turbines for Reducing Power and Load
Fluctuation,” IEEE Transactions on
Sustainable Energy, Vol. 7, No. 1, pp. 23-31, January 2016.
40. Yang, Z.
Li, Y. and Seem, J.E.
“Maximizing Wind Farm Energy Capture by Nested-loop Extremum Seeking
Control,” ASME Journal of Dynamic
Systems, Measurement and Control, 137(12): 121010-121010-9, DS-14-1398.
41. Chen, Q., Li, Y., Seem, J.E. “Dual-Loop Self-Optimizing Robust Control of Wind Power
Generation with Doubly-Fed Induction Generator,” ISA Transactions, Special
Issue on Control of Renewable Energy Systems, Vol. 58, pp. 409-420,
September 2015.
42. Yang, Z.
Li, Y. and Seem, J.E. “Multi-model
Predictive Control for Wind Turbine Operation under Meandering Wake of
Upstream Turbines,” Control
Engineering Practice, Vol. 45, pp. 37-45, December 2015.
43. Hu, B., Li, Y., Mu, B., Wang, S.,
Seem, J.E., Cao, F. “Extremum Seeking Control for Efficient Operation of
Hybrid Ground Source Heat Pump System,” Renewable
Energy, Vol. 86, pp. 332-346, February 2016.
44. Li, X., Li, Y., Seem,
J.E. and Lei, P. “Detection of Internal Resistance Change for Photovoltaic
Arrays Using Extremum Seeking Control MPPT Signals,” IEEE Transactions on Control Systems Technology, Vol. 24, No.
1, pp. 325-333, January 2016.
45. Mu, B., Li, Y.,
Seem, J.E. and Hu, B. “A Multi-variable Newton-based Extremum Seeking
Control for Condenser Water Loop Optimization of Chilled Water Plant,” ASME
Journal of Dynamic Systems, Measurement and Control. Vol. 137, No. 11, 111011
(2015) (10 pages); Paper No. DS-14-1449, November 2015.
46. Hu, B., Li, Y., Cao, F. and Xing, Z.
“Extremum Seeking Control of COP Optimization for Air-Source Transcritical
CO2 Heat Pump Water Heater System,” Applied
Energy, Vol. 147, pp. 361-372, June 2015.
47. Dong, L., Li, Y., Mu, B.,
and Xiao, Y. “Self-Optimizing Control of Air-Source Heat Pump with
Multivariable Extremum Seeking”, Applied
Thermal Engineering, Vol. 84, pp. 180-196, June 2015.
48. Cheng, X., Hu, X., Yang, L., Husain, I., Inoue, K., Krein, P.,
Lefevre, R., Li, Y., Nishi, H., Taiber, J.G., Wang, F.-Y., Zha, Y., Gao, W. and Li,
Z. “Electrified Vehicles and the
Smart Grid: The ITS Perspective,” IEEE
Transactions on Intelligent Transportation Systems, Vol. 15, No. 4, pp.
1388-1404, August 2014.
49. Li, P., Li, Y., Seem,
J.E., Qiao, H., Li, X. and Winkler, J. “Recent Advances in Dynamic Modeling
of HVAC Equipment – Part 2: Modelica Based Modeling,” HVAC&R Research, Vol. 20, No. 1, pp. 150-161, January 2014.
50. Li, P., Qiao, H., Li, Y.,
Seem, J.E., Li, X. and Winkler, J. “Recent Advances in Dynamic Modeling of
HVAC Equipment – Part 1: Equipment Modeling,” HVAC&R Research, Vol. 20, No. 1, pp.
136-149, January 2014.
51. Li, X., Li, Y. and Seem,
J.E. “Maximum Power Point Control of Photovoltaic System Using Adaptive
Extremum Seeking Control,” IEEE Transactions on Control Systems
Technology, Vol. 21, No. 6, pp. 2315-2322, November 2013.
52. Zhang, L. and Li, Y.
“Optimal Energy Management of Wind-Battery Hybrid Power System with
Two-Scale Dynamic Programming,” IEEE
Transaction on Sustainable Energy. Vol. 4, No. 3, pp.
765-773, July 2013.
53. Li, X., Li, Y. and Seem,
J.E. “Dynamic Modeling and Self-optimizing Operation of Chilled Water
Systems Using Extremum Seeking Control,” Energy and Buildings, Vol. 58, pp. 172-182, March 2013.
54. Ugle, R., Li, Y. and Dhingra, A.
“Equalization Integrated Online Monitoring of Health Map and Worthiness of
Replacement for Battery Packof Electric
Vehicles,” Journal of Power Sources,
Vol. 223, No. 1, pp. 293-305, February 2013.
55. Li, P., Seem, J.E. and Li, Y. “Experimental Validation for
dp/dt Assumption of Heat Exchangers in
Vapor Compression Refrigeration Cycles,” ASME Journal of Heat
Transfer, Vol. 134, No. 11,
114502 (6 pages), November 2012.
56.
Wu, X. Li, Y., Li, F., Yang, Z. and
Teng, W. “Adaptive Estimation-Based Leakage Detection for
a Wind Turbine Hydraulic Pitching System,” IEEE/ASME Transactions on Mechatronics, Vol. 17, No. 5, pp. 907-914, October 2012.
57. Wu, X. and Li, Y. “Self-Learning Based
Centrifugal Compressor Surge Mapping with Computationally Efficient
Adaptive Asymmetric Support Vector Machine,” ASME Journal of Dynamic Systems, Measurement and Control, Vol.
134, No. 5, 051008 (10 pages), September 2012
58. Lei, Y. and Li, Y. “Development and Control
of Broken-Strap Monitoring System for Newspaper Flexi-Roll Machines,” International Journal of
Automation and Control, Vol. 6, No. 1, pp. 81-103, 2012
59.
Li, P., Li, Y. and Seem,
J.E.
“Consistent
Initialization of System of Differential-Algebraic
Equations for Dynamic Simulation of
Centrifugal Chillers,” Journal
of Building Performance Simulation. ,
Vol. 5, No. 2,
March 2012, pp. 115-139.
60.
Wu, X., Li, Y. and Teng, W. “Modified Hidden Semi-Markov Models for
Wear Prognosis,” Proceedings of the
Institution of Mechanical Engineers, Part J, Journal of Engineering
Tribology, Vol. 226, No. 2, pp. 174-179, February 2012.
61.
Yang, Z., Li, Y. and
Seem, J.E. “Individual Pitch Control for Wind Turbine Load Reduction
Including Wake Interaction,” Wind
Engineering, Vol. 35, No. 6, pp. 715-738, December
2011.
62. Ranjan, N. and Li, Y.
“Trip Based Stochastic Prediction of Battery State of Charge for Electric
Vehicles,” International Journal of
Electric and Hybrid Vehicles, Vol. 3, No. 4, pp.
353–368, 2011.
63.
Wu, X., Li, Y., Zhou, C., Gao, Q. and Teng, W.
“Life Extending
Minimum-Time Path Planning for Hexapod Robot,” International Journal of Advanced Robotic Systems, Vol. 8, No.
2, pp. 1-6, June 2011.
64.
Lei, P., Li, Y. and Seem,
J.E.
“Modeling
and Global MPPT Control for Photovoltaic Array with Variable Shading,” IEEE Transactions on
Sustainable Energy, Vol. 2, No. 3, pp. 348-358, July 2011.
65.
Li, P., Seem, J.E. and Li, Y. “A New Explicit Equation for Accurate Friction
Factor Calculation of Smooth Pipes,” International Journal of Refrigeration,
Vol. 34, No. 6, pp. 1535-1541, September 2011.
66.
Wu, X., Li, Y., Liu, S.
and Perez, R.A. “Local Minimum-Time Trajectory Planning for Five-Axis
Machining with and without Tool Tip Deviation,” International Journal of Mechatronics and Manufacturing Systems, Vol. 4, No.3/4, pp. 304 – 321, 2011.
67.
Li, P., Li, Y. and Seem,
J.E. “Efficient Operation of Air-side Economizer Using Extremum Seeking
Control,” ASME Transactions
- Journal of Dynamic Systems, Measurement and Control, Vol. 132, No. 3,
pp. 031009 (10 pages), May 2010.
68.
Li, P., Li,
Y. and Seem, J.E. “Modelica-Based Dynamic Modeling of a Chilled-Water
Cooling Coil”, HVAC & R Research, Vol. 16, No. 1, pp. 35-58, January 2010.
69.
Bin, Y., Li, Y.
and Peng, Z.-R. “Multiple Trip Information Based Spatial Domain
Optimization for Power Management of Plug-in Hybrid Electric Vehicles,” International Journal of Electric and Hybrid Vehicles, Vol. 2, No. 4, pp. 259–281, 2010.
70.
Creaby, J., Li, Y. and Seem, J.E. “Maximizing
Wind Turbine Energy Capture Using Multi-variable
Extremum Seeking Control,” Wind
Engineering, Vol. 33, No. 4, pp. 361-387, June 2009.
71.
Gong, Q., Li, Y. and Peng, Z.-R. “Trip Based Optimal Power Management of Plug-in
Hybrid Electric Vehicles with Advanced Traffic Modeling”, SAE International Journal on Engines,
Vol. 1, No. 1, pp. 861-872, 2009
72.
Gong, Q., Li, Y. and Peng, Z.-R. “Optimal Power Management of Plug-in Hybrid Electric
Vehicles with Intelligent Transportation Systems,” IEEE Transactions on
Vehicular Technology, Vol. 57, No. 6, pp. 3393-3401, 2008
73.
Li, Y., Rotea, M. A., Chiu, G. T.-C., Mongeau, L.
G. and Paek, I.-S. “Extremum Seeking Control of Tunable Thermoacoustic
Cooler”. IEEE Transactions on Control Systems
Technology, Vol. 13, No. 4, 527-536, July 2005.
74.
Li, Y. and Chiu, G. T.-C. “Control of Loudspeakers Using
Disturbance-Observer Type Velocity Estimation”. IEEE/ASME
Transactions on Mechatronics, Vol. 10, No. 1, 111–117, April 2005.
75.
Li, Y., Paek, I.-S., Chiu, G. T.-C., Mongeau, L. G. and Braun, J. E. “Reply to comments on ‘Adaptive tuning of
an electrodynamically driven thermoacoustic cooler’ [J.
Acoust. Soc. Am. 111 (3), 1251-1258, 2002]”, Journal of Acoustical Society of
America. Vol. 115, No. 3, 976-979, March 2004.
76.
Li, Y., Chiu, G. T.-C. and Mongeau, L. G. “Robust Repetitive Control:
Acoustic Impedance Matching for Dual-Driver Standing Wave Tube”, IEEE Transactions on Control Systems
Technology, Vol. 12, No. 6, pp. 869-880, November 2004.
77.
Li, Y., Minner, B. L., Chiu, G. T.-C., Mongeau, L. G. and Braun, J. E.
“Adaptive Tuning of an Electrodynamically Driven Thermoacoustic
Cooler”. Journal of Acoustical Society of America, Vol. 111, No. 3,
1251-1258, March 2002.
Conference
Papers
[1] Zhao, Z., Li, Y., T.I. Salsbury and J.M. House, “Control
Structure Design of Building HVAC Systems Using a Data-Driven
Self-Optimizing Control with Active Set Changes,” ASME DSCC 2020 Virtual
Conference, October 5-7, 2020. (Energy Systems Technical Committee Best
Paper Award)
[2] Zhao, Z., Li, Y., T.I. Salsbury, C.F. Alcala and J.M.
House, "Self-Optimizing Control of an Air Source Heat Pump," Proceedings of 2019 American Control
Conference, pp. 223-228, Philadelphia, PA, USA, July 10-12, 2019.
[3] Wang, W. and Li, Y. “Real-time
optimization of intermediate temperature for a cascade heat pump via
extreme seeking,” 13th International
Modelica Conference, Paper No. 72, Regensburg, Germany, March 4-6, 2019
[4] Zhou, F. and Li, Y. “Enengy Management of
Smart Community with EV Charging Using Distributed Model Predictive
Control,” Proceedings of ASME 2018 Dynamic Systems and Control Conference,
Paper No. DSCC2018-9240, Atlanta, GA, Sept. 30 – Oct. 3, 2018. (Finalist for Energy Systems Technical Committee Best
Paper Award)
[5] Wu, Z. and Li, Y. “Control Oriented
Dynamic Modeling of A Tension-Leg Platform Based Floating Offshore Wind
Turbine with Dynamic Vibration Absorbers,” Proceedings of ASME 2018 Dynamic
Systems and Control Conference, Paper No. DSCC2018-9084, Atlanta, GA, Sept.
30 – Oct. 3, 2018.
[6] Xiao, Y., Rotea, M.A., Li, Y. and Fahimi,
B. “ESC Based Optimal Stator Frequency Control of DFIG-DC System for
Efficiency Enhancement,” 2018 IEEE
Energy Conversion Congress and Exposition, September 23 – 27, 2018,
Portland, OR, USA.
[7] Liu, C., Li, Y., Cooney, J.A., Fine, N.E.
and Rotea, M.A. “NREL FAST Modeling
for Blade Load Control with Plasma Actuators,” 2018 IEEE Conference on Control Technology and Applications,
August 21-24, 2018, Copenhagen, Denmark.
[8] Wu, Z. and Li, Y. “Platform Stabilization
and Load Reduction of Floating Offshore Wind Turbines Using Dynamic
Vibration Absorbers,” Proceedings of
2018 American Control Conference, Milwaukee, WI, June 27-29, 2018.
[9] Dong, L., Li, Y., Salsbury, T.I. and
House, J.M. “Constraint Handling in ESC Control Strategies with Application
to HVAC Systems,” Proceedings of 2018
American Control Conference, Milwaukee, WI, June 27-29, 2018.
[10] Wang, W., Li, Y. and Cao, F. “Real-time
Optimization of Vapor-Injection Air-Source Heat Pump Based Water Heating
with Extremum Seeking,” ASHRAE 2018 Annual Conference, Houston, TX, June
23-27, 2018.
[11] Liu, S., Bin, Y., Li, Y. and Scheppat, B.
Decentralized Model Predictive Control for Polymer Electrolyte Membrane
Fuel Cell System, January 2018 IFAC-PapersOnLine 51(31):659-664. DOI:
10.1016/j.ifacol.2018.10.153.
[12] Wu, Z. and Li, Y., “Real-Time Optimization
of Wind Farm Energy Capture With Delay Compensated Nested-Loop Extremum
Seeking Control,” Proceedings of the
2017 ASME Dynamic Systems and Control Conference, Paper No.
DSCC2017-5262, Tysons Corner, VA, October 11-13, 2017.
[13] Ruan, X., Liu, Y. and Li, Y. “Convergence
characteristics of PI-type Iterative Learning Control for Linear
Time-Invariant Systems,” Proceedings
of the 6th IEEE Conference on Data Driven Control and Learning Systems
(DDCLS 2017), May 26-27, 2017, Chongqing, China. DOI:
10.1109/DDCLS.2017.8068072.
[14] Bin, Y., Rajashekara, K., Li, Y. and Xu,
H. “Cascaded Control of Output Power for PEMFC Systems,” Proceedings of the 36th
Chinese Control Conference (CCC), July 26-28, 2017, Dalian, China, DOI:
10.23919/ChiCC.2017.8028827
[15] Zhao, Z., Li, Y., Salsbury, T.I. and
House, J.M. “Input Selection for Multivariable Extremum Seeking Control
with Application to Real-time Optimization of A Chilled-Water Plant,” Proceedings of 2017 American Control
Conference, 62-67, Seattle, WA, May 24-26, 2017.
[16] Xiao, Y., Li, Y., Rotea, M.A.
“Multi-objective Extremum Seeking Control for Enhancement of Wind Turbine
Power Capture with Load Reduction,” Journal
of Physics: Conference Series 753 (2016) 052025, The Science of Making
Torque from Wind (TORQUE 2016), doi:10.1088/1742-6596/753/5/052025.
[17] Van Dijk, M., van Wingerden, J.W., Ashuri, T., Li,
Y., Rotea, M.A. “Yaw-Misalignment and its Impact on Wind Turbine Loads
and Wind Farm Power Output,” Journal
of Physics: Conference Series 753 (2016) 062013, The Science of Making
Torque from Wind (TORQUE 2016), doi:10.1088/1742-6596/753/6/062013.
[18] Dong, L., Li, Y., Salsbury, T.I. and
House, J.M. “Automatic Mode Switching for A Multi-functional Variable
Refrigerant Flow System,” Proceedings
of the 16th International Refrigeration and Air Conditioning
Conference at Purdue, Paper No. 2680, West Lafayette, IN, USA, July
11-14, 2016.
[19] Zhao, Z., Li, Y., Salsbury, T.I. and
House, J.M. “Evaluation of an Extremum Seeking Control Based Optimization
and Sequencing Strategy for a Chilled-water Plant,” Proceedings of the 4th International High Performance
Buildings Conference at Purdue, Paper No. 33682, West Lafayette, IN,
USA, July 11-14, 2016.
[20] Zhu, Y., Li, Y., Dong, L., Salsbury, T.I.
and House, J.M. “Distributed Extremum Seeking Control for a Variable
Refrigerant Flow System,” Proceedings
of the 16th International Refrigeration and Air Conditioning
Conference at Purdue, Paper No. 2681, West Lafayette, IN, USA, July
11-14, 2016.
[21] Dong, L., Li, Y., Salsbury, T.I. and
House, J.M. “Self-optimizing Control and Mode Switching for
Multi-functional Variable Refrigerant Flow Air Conditioning Systems via
Extremum Seeking,” Proceedings of
2016 American Control Conference, 593-598, Boston, MA, July 6-8, 2016.
[22] Mu, B., Li, Y., Salsbury, T.I. and House,
J.M. “Optimization and Sequencing of Chilledwater Plant Based on Extremum
Seeking Control,” Proceedings of 2016
American Control Conference, 2373-2378, Boston, MA, July 6-8, 2016.
[23] Wu, Z. and Li, Y. “Stabilization of
Floating Offshore Wind Turbines by Artificial Muscle based Active Mooring
Line Force Control,” Proceedings of
2016 American Control Conference, 2277 – 2282, Boston, MA, July 6-8,
2016.
[24] Dong, L., Li, Y., Salsbury, T.I. and
House, J.M., “Extremum Seeking Controls for Efficient Operation of Multi-Functional
Variable Refrigerant Flow System,” 2016
ASHRAE Winter Conference, Paper #18045, January 23-27, 2016, Orlando,
FL, USA.
[25] Xiao, Y., Li, Y. and Rotea, M.A.
“Experimental Evaluation of Extremum Seeking Based Region-2 Controller for
CART3 Wind Turbine,” AIAA 2016
Sci-Tech Wind Energy Symposium, Paper No. AIAA 2016-1737, San Diego,
CA, January 4-8, 2016.
[26] Ashuri, T., Rotea, M.A., Xiao, Y., Li, Y.,
Ponnurangam, C.V. “Wind turbine aerodynamics performance degradation and
its mitigation via Extremum seeking controls,” AIAA 2016 Sci-Tech Wind Energy Symposium, Paper No. AIAA
2016-1738, San Diego, CA, January 4-8, 2016.
[27] Mu, B., Li, Y., Salsbury, T.I. and House,
J.M., “Extremum Seeking Based Control Strategy for A Chilled-Water Plant
with Parallel Chillers,” ASME 2015
Dynamic Systems and Control Conference, Invited Seesion for Building Energy Systems, DSCC2015-9949,
October 28-30, 2015, Columbus, OH, USA.
[28] Mu, B., Li, Y., Seem, J.E. and Hu, B.
“Self-Optimizing Efficient Operation of Chiller-Tower Plant with
Multi-Variable Extremum Seeking Control,” Paper No. CH-15-C014, 2015 ASHRAE Winter Conference,
Chicago, IL, Jan. 24-28, 2015.
[29] Jalili, K., Li, Y. and Rotea, M.A. “Pitch
and Roll Motion Control of A Floating Wind Turbine with Hybrid Actuation,”
Paper No. DSCC2014-6064, Invited Session for Dynamics and Control of Wind
Energy Systems, ASME 2014 Dynamic Systems and Control Conference, San
Antonio, TX, October 22-24, 2014.
[30] Mu, B., Li, Y., Seem, J.E. and Hu, B. “A
Multi-Variable Newton-Based Extremum Seeking Control for a Chilled Water
Plant With Variable Water and Air Flow Operation,” Paper No.
DSCC2014-6343, ASME 2014 Dynamic
Systems and Control Conference, San Antonio, TX, October 22-24, 2014.
[31] Hu, B., Li, Y., Mu, B., Wang, S., Seem,
J.E. and Cao, F. “Extremum Seeking Control of Hybrid Ground Source Heat
Pump System,” Paper #2472, Proceedings of the 15th International Refrigeration and Air
Conditioning Conference at Purdue, July 14-17, Purdue University, West
Lafayette, IN, USA.
[32] Xiao, Y., Li, Y. and Seem, J.E.
“Multi-variable Extremum Seeking Control for Mini-split Air-conditioning
System,” Paper #2508, Proceedings of the 15th International Refrigeration and Air
Conditioning Conference at Purdue, July 14-17, 2014, Purdue University,
West Lafayette, IN, USA.
[33] Mu, B., Li, Y. and Seem, J.E.
“Experimental Study on Extremum Seeking Control for Efficient Operation of
Air-side Economizer,” Paper #3471, Proceedings of the 15th International
Refrigeration and Air Conditioning Conference at Purdue, July 14-17, 2014,
Purdue University, West Lafayette, IN, USA.
[34] Li, Y., Jalili, K., Yang, Z. and Seem, J.E. “Active
Horizontal Vane Control for Stabilizing Platform Pitch Motion of Floating
Offshore Turbines,” Paper No. 2013-0452, Proceedings of
the 52nd
AIAA Aerospace Science Meeting, January 13-17,
2014, National Harbor, MD.
[35] Yang, Z., Li, Y. and Seem, J.E. “Maximizing Wind
Farm Energy Capture Via Nested-Loop Extremum Seeking Control, Invited Session on
Wind Energy Systems and Control,” Proceedings
of ASME Dynamic Systems and Control Conference, Munger Center, Palo
Alto, CA, October 20-22, 2013.
[36] Xiao, Y., Li, Y.
and Seem, J.E. “Maximum Power Point Tracking of Multi-String Photovoltaic
Array via Simultaneous
Perturbation Stochastic Approximation, Proceedings of ASME Dynamic Systems and
Control Conference, Munger Center, Palo Alto, CA, October 20-22, 2013.
[37] Mu, B. Li, Y. and Seem, J.E. “Discrimination of
Steady State and Transient State of Extremum Seeking Control Via Sinusoidal
Detection,” Proceedings of ASME Dynamic Systems and Control Conference,
Munger Center, Palo Alto, CA, October 20-22, 2013.
[38] Mu, B. Li, Y. and Seem, J.E. “Comparison of
Several Self-Optimizing Control Methods for Efficient Operation for a
Chilled Water Plant,” Proceedings of
ASME Dynamic Systems and Control Conference, Munger Center, Palo Alto,
CA, October 20-22, 2013.
[39] Li, X., Li,
Y. and Seem, J.E. “Maximum Power Point Tracking for Photovoltaic
Systems Using Adaptive Extrmum Seeking Control,” to be presented at the 50th IEEE Conference on Decision and
Control and European Control Conferences, December 12-15, 2011,
Orlando, FL
[40] Yang,
Z. and Li, Y. “Active Vertical-Vane Control for Roll Motion of Floating Offshore
Wind Turbine,” Paper No. 2013-0452, Proceedings of the 51st AIAA Aerospace Science Meeting, January 7-10, 2013,
Grapevine, TX.
[41] Yang,
Z., Li, Y. and Seem, J.E. “Model Predictive
Control for Wind Turbine Load Reduction Including Wake Meandering Modelling,” Invited Session on Renewable Energy Systems,” Proceedings of 2012 American Control
Conference, pp. 3008 – 3013, June 27-29, 2012, Montreal, QC, Canada.
[42] Li, X., Li, Y., Seem, J.E. and Li, P. “Extremum Seeking Control of Cooling
Tower for Self-Optimizing Efficient Operation of Chilled Water Systems,” Proceedings of 2012
American Control Conference, pp. 3396-3401,
June 27-29, 2012, Montreal, QC, Canada.
[43] Yang,
Z., Li, Y. and Seem, J.E.
“Individual Pitch Control for Wind Turbine Load Reduction with Wake
Meandering Modelling,” Proceedings of the 50th AIAA Aerospace Science Meeting, January 9-12,
2012, Nashville, TN
[44] Yang,
Z., Li, Y. and Seem, J.E. “Individual Pitch
Control for Wind Turbine Load Reduction Enhanced with Inter-Turbine Wake
Modelling,” Invited Session on Energy Harvesting and
Distribution, Proceedings of 2011 ASME Dynamic Systems and Control Conference, pp. 779-786, October 31 - November
2, 2011, Arlington, VA.
[45] Li, X., Li, Y., Seem, J.E. and Lei, P. “Maximum
Power Point Tracking for Photovoltaic Systems Using Adaptive Extrmum
Seeking Control,” Invited Session on Energy Harvesting and
Distribution, Proceedings of 2011 ASME Dynamic Systems and Control Conference, pp. 803-810, October 31 - November
2, 2011, Arlington, VA.
[46] Lei,
P., Li, Y. and Seem, J.E. “MPPT and Integrated
Diagnostics for Multi-String PV System with Multi-Input ESC,” Proceedings of 2011 ASME Dynamic Systems and Control Conference,
pp. 409-416, October 31 - November 2, 2011, Arlington, VA.
[47] Zhang, L. and Li, Y. “Optimal
Energy Management of Hybrid Power System with Two-Scale Dynamic Programming,” Proceedings of 2011 ASME Dynamic Systems and Control Conference, pp. 247-254, October 31 - November
2, 2011, Arlington, VA.
[48] Chen,
Q., Li, Y. and Seem, J.E. “Bumpless Transfer Design for Wind Turbine Inter-Region
Control Switching for Power Flicker Reduction,” to be presented at IEEE 2011 Power Systems Conference and
Exposition (PSCE), Pheonix, AZ, March 20, 2011
[49] Zhang,
L. and Li, Y. “Two-scale Dynamic
Programming for Energy Management of Hybrid Power Systems,” to be presented
at IEEE 2011 Power Systems Conference
and Exposition (PSCE) and accepted by 2011 American Control Conference
[50] Yang,
Z., Li, Y. and Seem, J.E.
“Individual Pitch Control for Wind Turbine Load Reduction Including Wake
Interaction,” AIAA Paper No. 2011-0820, 49th
Aerospace Sciences Meeting, Orlando, FL, January 4-7, 2011. Also
accepted by 2011 American Control
Conference
[51] Ugle, R. and Li,
Y. “Battery Pack Degradation Analysis via Charge Equalization
Integrated Diagnostics and Trip Based Evaluation of Energy Loss,” SAE Paper
No. PFL11-0770, to be presented at 2011
SAE Congress, April 12-14, Detroit, MI.
[52] Ranjan, N.
and Li, Y. “Trip Specific Stochastic Estimation of Battery
State-of-Charge for Electric Vehicles ,” SAE Paper No. PFL11-0788, to be
presented at 2011 SAE Congress,
April 12-14, 2011, Detroit, MI.
[53] Lei,
P., Li, Y. and Seem, J.E. “Modeling and Global MPPT Control for
Photovoltaic Array with Variable Shading,” Proceedings of 2010 ASME Dynamic Systems and Control Conference
(DSCC’2010), September 13-15, 2010, Cambridge, MA
[54] Chen,
Q., Li, Y., Yang, Z., Seem, J.E.
and Creaby, J. “Self
Optimizing Robust Control for Maximizing Power Conversion for Wind
Turbines with Doubly Fed Induction Generator,” Proceedings of 2010 ASME
Dynamic Systems and Control Conference (DSCC’2010), September 13-15,
2010, Cambridge, MA
[55] Wu, X., Li, Y. and Consi, T. R. “Life Extension
Based Posture Synthesis of A Six-Legged Symmetric
Robot on Corrugated Surfaces,” Proceedings of 2010 ASME
Dynamic Systems and Control Conference (DSCC’2010), September 13-15,
2010, Cambridge, MA
[56] Yang, Z., Li,
Y. and Seem, J.E. “Individual Pitch Control For Wind Turbine Load
Reduction Including Wake Modeling,” Proceedings of 2010 ASME
Dynamic Systems and Control Conference (DSCC’2010), September 13-15, 2010, Cambridge, MA
[57] Li, P., Li, Y. and Seem, J.E. “Dynamic Modeling and Stability Analysis for Centrifugal
Chillers,” Proceedings of 2010 ASME
Dynamic Systems and Control Conference (DSCC’2010), September 13-15,
2010, Cambridge, MA
[58] Li, X., Li,
Y. and Seem, J.E. “Dynamic Modeling of Mechanical Draft Counter-Flow
Wet Cooling Tower with Modelica,” Proceedings of 2010 ASME
Dynamic Systems and Control Conference (DSCC’2010), September 13-15, 2010, Cambridge, MA & 2010 Purdue Compressor Engineering, Refrigeration and Air
Conditioning and High Performance Buildings Conferences.
[59] Li, P., Li,
Y. and Seem, J.E. “Modelica Based Dynamic Modeling and Self-Optimizing
Control of Water-Cooled Centrifugal Chiller System,” 2010 Purdue Compressor Engineering, Refrigeration and Air
Conditioning and High Performance Buildings Conferences.
[60]
Lei,
P., Li, Y., Chen, Q. and Seem,
J.E. “Extremum Seeking Control Based Integration of MPPT and Degradation
Detection for Photovoltaic Arrays,” Proceedings
of 2010 American Control
Conference, Baltimore, MD, June 30 ~ July 2, 2010
[61]
Wu,
X., Li, Y., Yang, Z. and Lu, B.
“Model Based Fault Diagnosis for Wind Turbine Hydraulic Pitching Systems,” Proceedings of 2010 American Control Conference, Baltimore, MD, June 30 ~ July
2, 2010
[62]
Bin,
Y., Li, Y., Feng, N. “Nonlinear Dynamic Battery Model with Boundary and Scanning Hysteresis,”
Paper No. ASME DSCC2009-2745, Proceedings
of 2009 ASME Dynamic Systems and Control Conference, Hollywood, CA,
October 12-14, 2009
[63]
Bin,
Y., Reama, A., Cela, A., Natowicz, R.,
Abderrahmane, H and Li, Y. “On Fast Dynamic Programming for Power
Splitting Control of Plug-in Hybrid Electric Vehicles,” Paper No. ASME
DSCC2009-2745, Proceedings of 2009
ASME Dynamic Systems and Control Conference, Hollywood, CA,
October 12-14, 2009
[64]
Lu,
B., Li, Y., Wu, X. and Yang, Z. “A Review of Recent Advances in Wind
Turbine Condition Monitoring and Fault Diagnosis,” Proceedings of 2009 IEEE Symposium on Power Electronics and
Machines in Wind Applications, Paper No. PEMWA-125, June 24-26, 2009, Lincoln, Nebraska
[65]
Li,
P., Li, Y., Seem, J.E. “Extremum Seeking Control for Efficient and
Reliable Operation of Air-Side Economizers,” Proceedings of 2009 American Control Conference, pp.
20 – 25, June 10-12, 2009, St.
Louis, MO, USA
[66]
Gong,
Q., Li, Y. and Peng, Z.-R. “Power Management of Plug-In Hybrid
Electric Vehicles Enhanced with Neural Network Based Freeway Trip
Modeling,” Proceedings of 2009
American Control Conference, pp. 4601 – 4606, June
10-12, 2009, St. Louis,
MO, USA
[67]
Bin,
Y., Li, Y., Gong, Q. and Peng, Z.-R. “Multiple Traffic Information
Based Trip Model and Optimal Power Management for Plug-in Hybrid Electric
Vehicles,” Proceedings of 2009
American Control Conference, pp. 4607 – 4612, June
10-12, 2009, St. Louis,
MO, USA
[68]
Wu,
X., Li, Y., Liu, S. and Perez, R.A. “Local Minimum Time Trajectory
Planning for Five-Axis Machining with or without Deflection,” Proceedings of 2009 American Control Conference, pp. 5564 – 5569, June
10-12, 2009, St. Louis, MO, USA
[69]
Wu,
X., Li, Y., Lundell, T.D. and Guru, A.K. “Integrated Prognosis of AC
Servo Motor Driven Linear Actuator Using Hidden Semi-Markov Models,” Paper
No. IEMDC2009-11048, Proceedings of
the 2009 International Electric Machines and Drives Conference, Miami, FL,
May 3-6, 2009
[70] Creaby, J., Li,
Y. and Seem, J. E. “Maximizing Wind Turbine Energy Capture
Via Extremum Seeking Control,” Proceedings of 2008 ASME Dynamic Systems
and Controls Conference, October 20-22, 2008, Ann Arbor, MI. (45%
contribution)
[71] Li,
P., Li, Y. and Seem, J. E. “Efficient and Reliable Operation of
Air-Side Economizers Using Extremum Seeking Control,” Proceedings of
2008 ASME Dynamic Systems and Controls Conference, October 20-22, 2008,
Ann Arbor, MI.
[72] Gong, Q., Li, Y. and Peng, Z.-R.
“Computationally
Efficient Optimal Power Management for Plug-in Hybrid Electric Vehicles
with Spatial Domain Dynamic Programming,” Proceedings of 2008 ASME
Dynamic Systems and Controls Conference, October 20-22, 2008, Ann Arbor, MI.
[73] Gong, Q., Li, Y. and Peng, Z.-R.
“Computationally Efficient Optimal Power Management for Plug-in
Hybrid Electric Vehicles via Spatial Domain Optimization”, Invited Paper in
IEEE 2008
International Conference on Vehicular Electronics and Safety (ICVES)
Conference, September
20-22, 2008, Columbus, OH.
[74] Creaby, J., Li,
Y. and Seem, J. E. “Maximizing Wind Turbine Power Output via
Multivariable Extremum Seeking Control,” American Wind Energy Association WindPower 2008 Annual Conference and Expo, Session 10E – Loads and Controls, Houston, TX,
June 2008.
[75] Gong, Q., Li, Y. and Peng, Z.-R.
“Trip Based Optimal Power Management of Plug-in Hybrid Electric
Vehicles with Advanced Traffic Modeling Theory”, Proceedings of the 2008 American Control
Conference, pp.
3225-3230, Seattle,
June11-13, 2008
[76] Gong, Q., Li, Y. and Peng, Z.-R.
“Trip Based Optimal Power Management
of Plug-in Hybrid Electric Vehicle with Advanced Traffic Modeling”, SAE 2008-1316, presented at 2008 SAE World Congress, Detroit, MI,
April 14-17, 2008.
[77] Li,
P., Li, Y. and Seem, J.E. “Dynamic modeling and self-optimizing control
of air-side economizer Using Modelica”, Proceedings
of Modelica 2008 Conference,
Bielefeld, Germany, March 3-4 2008
[78] Gong, Q., Li, Y. and Peng, Z.-R.
“Nearly Globally Optimal Power Management of Plug-In Hybrid Electric
Vehicles with Trip Modeling”, IMECE2007-41638, Proceedings of 2007 IMECE,
Seattle, WA, November 11-15, 2007
[79] Wu, X., Li, Y. and Consi, T. R. “Gait Synthesis of Hexapod Robot for
Observation on Corrugated Surfaces,” Proceedings of 2007 Untethered
Submersible Technology Symposium (UUST'07), August 2007,
Durham, NH, USA
[80] Wu, X., Li, Y. and Consi, T. R. “Posture Analysis and Dynamic Control of a Symmetric Hexapod Robot
on Corrugated Surfaces for Underwater Observation”, IMECE2007-41632. Proceedings of 2007 IMECE, Seattle,
WA, November 11-15, 2007
[81] Wu, X. and Li, Y. “Computationally Efficient Data-driven Surge Map
Modeling for Centrifugal Air Compressors”.
Proceedings of 2007 American Control Conference, pp.
810-815, New York,
July 9-13, 2007
[82] Ji, Y., Li, Y. and Lee, J. “Orthonormal Basis Function Based Transient
Modeling for Boring Tool Degradation Monitoring”. Proceedings of
2007 American Control and Conference, pp. 1852-1857, New
York,
July 9-13, 2007
[83] Li, Y., Sodemann, A., Lee, J.,
Rucker, M., Lancaster,
R. and Carnagie, J. “Data-Driven Surge Map Modeling for Centrifugal Air
Compressors”. 2006 International
Mechanical Engineering Congress and Expo (IMECE).
[84] Li, Y., Wu, X., Lee, J., Rucker,
M., Lancaster, R. and Carnagie, J. “Robust Smith Predictor Based Position
Control of Inlet Guide Vane for Centrifugal Air Compressors”. 2006
International Mechanical Engineering Congress and Expo (IMECE).
[85] Li, Y., Rotea,
M., Chiu, G. T.-C., Mongeau, L. G. and Paek, I.-S. “Extremum Seeking
Control of Tunable Thermoacoustic Cooler”.
Proceedings of 2004 American
Control Conference, 2033-2038, June 2004, Boston, MA
[86] Li, Y., Chiu, G. T.-C. and Mongeau,
L. G. “Active Impedance Matching for Dual-Driver Standing Wave Tube”. Proceedings
of 2002 American Control Conference, 3771-3776, May 2002, Anchorage, Alaska
[87] Li, Y. and Chiu, G. T.-C. “Control
of Loudspeakers Using Disturbance-Observer Type Velocity Estimation for
Noise and Vibrations”. Proceedings of 2000 Japan-USA Symposium
on Flexible Automation, Vol. 2, 913 - 919. Ann Arbor, MI. July 23-26, 2000.
Sponsors
- National
Science Foundation
- Johnson Controls,
Inc., Building Efficiency Research Group
- WE Energies
- Eaton Corporation Innovation
Center
- Southeast Wisconsin Energy
Technology Research Consortium (SWETRC)
- Honda America
R&D
- US Department of Energy
- Toyota Motors
Manufacturing in Kentucky
- Rockwell Automation
- Marlow Industries, Inc.
Graduate Students
- Fenglin
Zhou
(Ph.D., UTD-ME)
- Chao Pan (Ph.D., UTD-ME)
- Md Nur-A-Adam
Dony (Ph.D.,
UTD-ME)
- Abdulmumin
Olamilekan Olaoke (Ph.D., UTD-ME)
- Zichen Zhao (Ph.D., UTD-EE)
Lab Alumni
- Zhongyou Wu (Ph.D., August 2020, UTD-ME;
Senior Mechatronics Engineer, KLA Corporation)
- Zhongfan Zhao (Ph.D., May 2020, UTD-EE;
Control Systems Engineer, Carrier Transicold)
- Liujia Dong (M.Sc.,
December 2014; Ph.D. December 2019, UTD-ME; now System Model Based
Design Engineer, Carrier, Bloomfield, CT)
- Wenyi Wang (Ph.D., December 2019, UTD-ME,
now Lecturer at Xi’an University of Architecture and Technology,
Xi’an, China)
- Yan Xiao (Ph.D., December 2018, UTD-EE,
co-supervised with Prof. Mario Rotea and
Prof. Babak Fahimi; Control Engineer, Danfoss Drives, Rockford, IL)
- Baojie Mu (Ph.D., December 2015, UTD-EE,
Research Engineer, Rheem Manufacturing, Lewsville, TX)
- Bin Hu (Ph.D., July 2015, Xi-An Jiaotong University, co-supervised with Prof. Feng
Cao, School of Energy and Power Engineering, Xi-An Jiaotong
University; Assistant Research Scientist, Research Institute of
Refrigeration and Crogenics, Shanghai Jiaotong University)
- Lei Zhang (Ph.D., UTD-EE, December 2014,
Senior Machine Learning Engineer, Adobe)
- Quan Chen (M.Sc., May
2014, UWM-ME, Automation Control and Electrical
Engineer II, Weir Minerals)
- Xuguang Liu
(M.Sc., December 2014, UTD-ME)
- Kaveh Jalili (M.Sc., May 2014, UTD-ME,
co-supervised with Prof. Mario Rotea)
- Zhongzhou Yang (Ph.D., December
2013, Chassis Embedded Software Engineer, Ford Motor Company)
- Xiao
Li (Ph.D., December 2012, Manager, Research & Development at ANSYS,
Inc.)
- Peng
Lei (M.Sc., May 2012; Sr. Principal Project Engineer -
Electrical, Saint-Gobain,
Eden Prairie, MN)
- Pengfei Li (Ph.D., October 2011, Machine Learning Engineer, Apple)
- Xin Wu (Ph.D., December 2010, Associate Professor, School of Energy,
Power and Mechanical Engineering, North China Electric Power
University, Beijing, China)
- Edgar
Bolivar Nieto (September
2010 – June 2011, Estudiante
Ingeniería Mecatrónica, Universidad Nacional De Colombia; Postdoc, University of Michigan)
- Tony P. Rousseau (M. Sc., May 2011, Senior Mechanical Engineer, Leonardo DRS)
- Nitin Ranjan (M. Sc., August 2010, Chief Technology Officer, Elutions, Inc., Waukesha, WI)
- Dr. Yang Bin (Postdoc,
July 2008 ~ January 2009; Visiting Scholar, April 2014- March 2015;
Professor, School of Mechanical Engineering, Chongqing University of
Technology, China)
- Justin Creaby (M. Sc,
Dec. 2008, Control Systems Software Engineer, Trimble, Inc.)
- Qiuming Gong (M.
Sc. Dec. 2008, PhD Student, 2006 ~ May 2009; HEV System Analysis
Engineer, Ford Motor Company)
- Angela Sodemann (M. Sc. June 2006; Assistant Professor, School of Engineering,
Arizona State University)
- Yun Lei (M. Sc. December 2006, Siemens Water Technology, Waukesha, WI)
- Eric Fritz (B. Sc. May 2006, Boston Scientific)
- Robert Brummond (B. Sc. December 2006, Staff Engineer, Harley-Davidson Motor
Company)
Visiting
Scholars
- Dr. Yi Zhang (Chongqing University, China)
- Mr. Xinyu Fan (Ph.D. Student, Beijing
Institute of Technology, November 2016 ~ October 2017)
- Dr. Yang Zhu (Postdoctoral Researcher,
August 2015 to date)
- Mike van Dijk (Visiting Scholar, M.Sc.
Student of TU-Delft)
- Prof. Xiaoe Ruan (Visiting Scholar, Professor
of Applied Mathematics, Xi’An Jiaotong University, December 2015 – February
2016)
- Prof. Yang Bin (Visiting Scholar, Associate
Professor of Beijing University of Technology, April 2014 – March
2015)
- Prof. Qingchun
Wang (Visiting
Scholar, Associate Professor of Beijing University of Forestry, April
2014 – March 2015)
Honors
& Awards
- ASME
DSCC 2020 Energy Systems Technical Committee Best Paper Award: Zhao, Z., Li, Y., T.I. Salsbury and J.M. House, “Control Structure
Design of Building HVAC Systems Using a Data-Driven Self-Optimizing
Control with Active Set Changes,” ASME DSCC 2020 Virtual Conference,
October 5-7, 2020.
- ASME
DSCC 2018 Energy Systems Technical Committee Best Paper Award
Finalist: Zhou,
F. and Li, Y. “Energy Management of Smart Community with EV Charging
Using Distributed Model Predictive Control,” Paper No. DSCC2018-9240,
Atlanta, GA, Sept. 30 – Oct. 3, 2018.
- 2007
Honda Initiation Grant: Trip Based Optimal
Power Management for Plug-in Hybrid Electric Vehicles
- Top 10 Research Expenditure in
2009-10, College of Engineering & Applied Science, University of
Wisconsin – Milwaukee
- Top 10 Research Expenditure in
2008-09, College of Engineering & Applied Science, University of
Wisconsin – Milwaukee
- Cummins Fellowship,
Purdue University, 2003
- Donnan Fellowship,
Purdue University, 2002
- Graduate Teaching
Fellowship, University of Saskatchewan, 1995
Teaching
UT-Dallas
- MECH 4310: Systems and Controls
(Fall 2012; Fall 2013; Spring 2014; Fall 2014; Spring 2015; Fall 2015;
Fall 2016; Spring 2017; Spring 2018)
- MECH 5370: Introduction to Wind
Energy (Spring 2015; Spring 2016; Fall 2017; Fall
2018)
- MECH 4v95 / 6v98: Introduction
to Wind Energy (Fall 2011; Spring 2013; Spring 2014)
- MECH 4350: Applied Heat
Transfer (Spring 2012; Spring 2013)
- MECH 4110: Systems Laboratory
(Fall 2012; Fall 2015; Spring 2016; Fall 2016; Spring 2017; Fall 2017;
Spring 2018; Fall 2018)
- MECH 4381 Senior Design
(Fall 2020)
UW-Milwaukee
- ME/EE
490: Introduction to Wind Energy (Spring 2010, jointly with Dr. Nasiri)
- ME/EE 890: Controls
for Renewable Energy (Fall 2010, jointly with
Dr. Nasiri)
- ME 479: Control and
Design of Mechatronic Systems (Fall 2004, Spring 2005, Fall 2005, Spring 2006,
Fall 2006, Fall 2007, Spring 2008, Fall 2008, Spring 2009, Fall 2009,
Spring 2011, Summer 2011)
- ME 474: Introduction
to Control Systems (Fall 2006)
- ME/EE 574:
Intermediate Control Systems (Fall 2005)
- ME/EE 718: Nonlinear
Control Systems
(Spring 2007, Fall
2010)
- ME/EE 816: Linear
Optimal and Robust Control (Spring 2006, Fall 2008, Spring 2011)
- ME/EE 819: Adaptive
Control
(Fall 2007, Spring 2009)
|