| UTD | Workshop Information | All Projects | Workshop Equipment | FaceBook | LinkedIn |

Drill

Drills and drill bits are available to do a variety of jobs. The attachments include the following:
  • 135 degree split point black oxide drill bits 1/16" to 1/4" for wood, metal, and plastic.
  • 1" hex shank spade but drill bit for wood.
  • Carbide tipped masonry drill bits 5/32" to 5/16" for brick, block, and mortar.
  • Brad point drill bits 3/16 to 3/8 for drilling clean holes in wood.
  • 2-1/8" hole saw for drilling large holes in wood.
  • Hex sgank nut setters 1/4" to 3/8" for driving bolts and hex fasteners.
  • Countersink for wood.
  • Center punch for marking the center when drilling in metals.

The drill bits for wood have a pointed tip. They are placed in the woodworking room:

This is what we have at the project workshop:

For more information, please contact:

Dr. Dani Fadda, Professor of Practice, 972-883-4626, fadda@utdallas.edu
Mechanical Engineering Department
Engineering and Computer Science West (ECSW) Building
Erik Jonsson School of Engineering and Computer Science
The University of Texas at Dallas
800 W Campbell Road, Richardson TX 75080